190 / DIAMOND BLADES www.youtube.com/FlexovitEMEA ✓ DO Read the safety instructions provided by the abrasive and equipment supplier ✓ DO Store abrasives in dry, frost-free conditions avoiding wide variations in temperature ✓ DO Ensure that the product is suitable for its purpose ✓ DO Handle, store and transport products with care ✓ DO Disconnect the power from the machine before fitting the product ✓ DO Examine all products before mounting and periodically during blade use for possible defects or damage (core flatness, fatigue cracks, undercutting, arbour hole damage...) ✓ DO Check that correct mounting devices are used and that they are clean, undistorted and free from burrs ✓ DO Ensure that work rests are properly adjusted and secure ✓ DO Wear appropriate personal protective equipment at all times ✓ DO Always use a correctly designed and adjusted guard (on the blade and belts) ✓ DO Ensure that the workpiece is secure ✓ DO Avoid clogging and uneven wear to ensure that the product is working efficiently ✓ DO Ensure accordance between product direction arrow / machine rotation ✓ DO Ensure that all machines using abrasives meet the requirements of the current european machinery directives-CE ✓ DO Be aware of the hazards likely during the use of abrasives and observe the recommended precautions to be taken: • Bodily contact with the abrasive product at operating speed • Injury resulting from product breakage in use • Grinding debris, sparks, fumes and dust generated by the grinding process • Noise • Vibration SAFETY ADVICE DO’S & DON’TS DO’S DONT’S ✘ DON’T Allow untrained people to use abrasives ✘ DON’T Use a product that is damaged or one which has been dropped ✘ DON’T Use a product if it cannot be properly identified ✘ DON’T Use a machine that is not in good working order or one with defective parts ✘ DON’T Force the abrasive onto the mounting device or modify the size of the mounting hole ✘ DON’T Exceed the maximum operating speed marked on the product ✘ DON’T Apply shock or excessive force to the product or let it overheat ✘ DON’T Use mounting flanges which are not clean and flat ✘ DON’T Tighten the mounting device excessively ✘ DON’T Start the machine until the guard is in place and fastened securely ✘ DON’T Continue to use a product if vibration occurs. True or replace it ✘ DON’T Grind on the part of the product which is not designed for the operation ✘ DON’T Stop the abrasive by applying pressure to its surface, let it stop naturally ✘ DON’T Exceed permissible rotation speeds: refer to values engraved on product ✘ DON’T Use blades with missing segments or core cracks ✘ DON’T Wear loose clothing, ties and jewellery ✘ DON’T Use abrasive products near flammable materials For your safety you should ensure that you are fully aware of how to safely use diamond blades For your safety you should ensure that you are fully aware of how to safely use diamond blades DIAMOND BLADES
RkJQdWJsaXNoZXIy MTM0NjUyNQ==