108 / FARÉCLA SOLUTIONS FARÉCLA SOLUTIONS www.youtube.com/NortonAbrasivesEMEA FINAL CLEANING AND PROTECTION To remove residue and contaminants while adding shine and protection NO SILICONES, NO VOC • Cleans away residue, dust, ngerprints and other contaminants • Use on paint, glass, trims, rubber and many other surfaces • Leaves a friction-free, high gloss nish • Leaves a breathable, water-resistant lm CLEAN AND PROTECT 1 L CAP101 (78072766935) G PLUS FINISHING CLOTH 400 mm x 400 mm 3 cloths FC-3 (78072700136) Use a clean, dry G Plus Finishing Cloth to bu to a shine Wipe clean with a G Plus Finishing Cloth Spray a light mist onto the surface SUPER FAST SYSTEM. Apply product, using a small amount Polish at 800 - 1100rpm, keeping the pad at Wipe clean with a G Plus Finishing Cloth HIGH CUT MEDIUM CUT FINE CUT To remove P1500 or ner* sanding marks To remove process marks and medium defects (such as swirls and light scu s) To remove ne defects (such as holograms and light swirls) and enhance gloss levels G360 SUPER FAST COMPOUND 1 kg SFC101 (78072700162) G MOP SUPER HIGH CUT PAD 6” / 150 mm GMC650 (78072700153) ON LIGHT COLOURS • Rapidly eliminates visible swirls and holograms • Leaves an excellent gloss nish ON LIGHT COLOURS • Further enhances gloss levels if desired ON DARK COLOURS • Rapidly eliminates heavy swirls and holograms • Prepares for FINE CUT polishing ON DARK COLOURS • Rapidly eliminates light swirls and holograms • Leaves an enhanced deep gloss nish G360 SUPER FAST COMPOUND 1 kg SFC101 (78072700162) G MOP ANGLED YELLOW FOAM 6” / 150 mm GMC622 (78072769182) G360 SUPER FAST FINISH 1 L SFF101 (78072700138) G MOP ANGLED BLACK FOAM 6” / 150 mm GMF622 (78072769185) ON ALL COLOURS • Eliminates P1500 sanding marks from all conventional clear coats (low bake) • Prepares for MEDIUM CUT polishing For optimum results use correct machine speeds, minimal product, apply minimal pressure and clean the pads regularly, especially the G Mop Super High Cut Pad, with a G Plus Spurring Brush. * P2000 is suggested for low energy clear coats (air dry). Apply product, using a small amount Using minimal pressure, start polishing at 1500rpm at a slight angle, ending at 900rpm keeping the pad at NO P3000 SANDING REQUIRED! P3000 Apply product, using a small amount Polish at 900 - 1300rpm, keeping the pad at Wipe clean with a G Plus Finishing Cloth FARÉCLA Farécla compounds use Engineered Abrasive Technology developed by scientists in a stateof-the-art R&D facility. Only the highest quality raw materials are used to ensure the engineered particles quickly, efficiently and permanently remove defects, such as scratches, sanding marks, swirls, holograms and oxidation. FARÉCLA SOLUTIONS
RkJQdWJsaXNoZXIy MTM0NjUyNQ==