METAL WORKING / 33 www.nortonabrasives.com MACHINES For use on pneumatic tools and mini angle grinders. RAPID PREP AO SCM • The open structure resists loading on softer metals so the disc can be used for longer before being changed, reducing down time and overall abrasive cost • A high content of abrasive throughout the disc means the cut rate is consistently high throughout its life • A flexible disc which conforms to contours of the part DIA CAP CODE GRADE TR TS PK QTY 50 mm S2108 Extra coarse 66623378355 50 S2208 Coarse 66623378359 66623378374 50 S2308 Medium 66623378363 50 S2408 Fine 66623378366 50 S2508 Very fine 66623378372 66623378378 50 75 mm S2108 Extra coarse 66623378356 50 S2208 Coarse 66623378360 50 S2308 Medium 66623378364 50 S2508 Very fine 66623378373 50 S2408 Fine 66623378382 50 DESCRIPTION ART NO. EXHAUST DIRECTION THROTTLE TYPE AIR CONSUMPTION COLLET CHUCK WEIGHT OF TOOL 50mm (2”) 22.000 MAX RPM (0,45 HP) mini angle grinder 66261177765 Rear Level 85 l/min 6mm 0,742 kg MINI ANGLE GRINDER • Model: Norton Mini Angle grinder 50mm (2”) • 22.000 MAX RPM (0,45 HP) • Designed for use with the quick-change back-up pad, SpeedLok and mini flap discs • Use with 38mm and 50mm quick change sanding discs and spindle mounted sanding specialties only. The accessories must have a rated speed greater than the speed marked on the tool Norton mini angle grinder APPLICATION TIPS: • Air tools require regular lubrication throughout the life of the tool. The air motor and bearing use compressed air to power the tool. As moisture in compressed air will rust the air motor, it must be lubricated daily. An inline oiling device is recommended. • This in an UNGUARDED tool and should NEVER be used with cut-off discs or other bonded abrasive grinding wheels. Never use any product that has a MAX RPM rating less that the RPM marked on the tool. METAL WORKING
RkJQdWJsaXNoZXIy MTM0NjUyNQ==