GLASS FOR FAÇADE 2020

87 Values given according to the standards 1 EN 410, 2 EN 673 and 3 EN ISO 140-3/717-1 4 Solar control coating in contact with PVB modifies performances and aesthetics. Please contact us to get the approved PVB list. 5 Bending results depend on the process; trials should be done for validation. 6 Screen-printing, roller coating, spray, digital printing inks and enamels validation is required. 7 COOL-LITE® SKN 154 may have a slight color deviation in transmission with SKN 154 II. Validation of a prototype is recommended if both versions are used on the same façade. 8 This coating can be laminated for use on a façade up to 1,500 m2 and project must be made from a single production batch from SGG. COOL-LITE® XTREME 70/33 II DIAMANT® with EASYPRO extra clear 71 0.33 0.38 2.15 COOL-LITE® XTREME 70/33 DIAMANT® extra clear 71 0.33 0.38 2.15 COOL-LITE® XTREME 70/33 II with EASYPRO neutral 70 0.33 0.38 2.12 COOL-LITE® XTREME 70/33 neutral 70 0.33 0.38 2.12 COOL-LITE® XTREME 60/28 II DIAMANT® with EASYPRO extra clear 62 0.28 0.33 2.21 COOL-LITE® XTREME 60/28 DIAMANT® extra clear 61 0.28 0.33 2.18 COOL-LITE® XTREME 60/28 II with EASYPRO neutral 61 0.28 0.32 2.18 COOL-LITE® XTREME 60/28 neutral 60 0.28 0.32 2.14 COOL-LITE® XTREME SILVER II DIAMANT® bright silver 50 0.25 0.29 2.00 COOL-LITE® XTREME SILVER II silver 49 0.25 0.29 1.96 COOL-LITE® XTREME 50/22 II DIAMANT® with EASYPRO extra clear 48 0.21 0.24 2.29 COOL-LITE® XTREME 50/22 II with EASYPRO neutral 47 0.21 0.24 2.24 NEW COOL-LITE® SKN 083 II with EASYPRO extra clear 76 0.41 0.47 1.85 NEW COOL-LITE® SKN 083 extra clear 76 0.41 0.47 1.85 NEW COOL-LITE® SKN 183 II with EASYPRO neutral 75 0.40 0.46 1.88 NEW COOL-LITE® SKN 183 neutral 75 0.40 0.46 1.88 COOL-LITE® SKN 076 II with EASYPRO extra clear 71 0.38 0.44 1.87 COOL-LITE® SKN 076 extra clear 71 0.38 0.44 1.87 COOL-LITE® SKN 176 II with EASYPRO neutral 70 0.37 0.43 1.89 COOL-LITE® SKN 176 neutral 70 0.37 0.43 1.89 COOL-LITE® SKN 065 II with EASYPRO extra clear 62 0.35 0.40 1.77 COOL-LITE® SKN 065 extra clear 62 0.35 0.40 1.77 COOL-LITE® SKN 165 II with EASYPRO neutral 61 0.34 0.39 1.79 COOL-LITE® SKN 165 neutral 61 0.34 0.39 1.79 COOL-LITE® SKN 054 II with EASYPRO extra clear 53 0.29 0.33 1.83 COOL-LITE® SKN 054 extra clear 53 0.29 0.33 1.83 COOL-LITE® SKN 154 II with EASYPRO neutral 52 0.28 0.32 1.85 COOL-LITE® SKN 154 neutral 52 0.28 0.32 1.85 COOL-LITE® SKN 145 neutral 41 0.22 0.25 1.86 COOL-LITE® SKN 044 II with EASYPRO extra clear 42 0.23 0.27 1.87 COOL-LITE® SKN 144 II with EASYPRO neutral 42 023 0.26 1.83 11 13 1.0 25.0 35(-1;-5) to be tempered yes 11 13 1.0 25.0 35(-1;-5) 11 13 1.0 25.0 35(-1;-5) to be tempered yes 11 13 1.0 25.0 35(-1;-5) 15 17 1.0 25.0 35(-1;-5) to be tempered yes 14 17 1.0 25.0 35(-1;-5) 14 17 1.0 25.0 35(-1;-5) to be tempered yes 14 17 1.0 25.0 35(-1;-5) 30 18 1.0 25.0 35(-1;-5) to be tempered yes 30 18 1.0 25.0 35(-1;-5) to be tempered yes 16 18 1.0 25.0 35(-1;-5) to be tempered yes 16 18 1.0 25.0 35(-1;-5) to be tempered yes 12 13 1.0 25.0 35(-1;-5) to be tempered 12 13 1.0 25.0 35(-1;-5) 12 13 1.0 25.0 35(-1;-5) to be tempered 12 13 1.0 25.0 35(-1;-5) 13 15 1.0 25.0 35(-1;-5) to be tempered yes 8 yes 13 15 1.0 25.0 35(-1;-5) 13 15 1.0 25.0 35(-1;-5) to be tempered yes 8 yes 13 15 1.0 25.0 35(-1;-5) 17 19 1.0 25.0 35(-1;-5) to be tempered yes 8 yes 17 18 1.0 25.0 35(-1;-5) yes 8 16 19 1.0 25.0 35(-1;-5) to be tempered yes 8 yes 16 18 1.0 25.0 35(-1;-5) yes 8 18 23 1.0 25.0 35(-1;-5) to be tempered yes 8 yes 19 23 1.0 25.0 35(-1;-5) yes 8 18 23 1.0 25.0 35(-1;-5) to be tempered yes 8 yes 19 22 1.0 25.0 35(-1;-5) yes 8 19 15 1.1 25.0 35(-1;-5) 21 15 1.1 25.0 35(-1;-5) to be tempered yes 8 20 15 1.1 25.0 35(-1;-5) to be tempered yes 8 coating processing possibilities CLIMAPLUS ® DOUBLE GLAZING UNITS to be tempered / annelead COOL-LITE ® SKN for double glazing unit CLIMAPLUS ® (6 | 16 | 4 mm, 90% Argon) on PLANICLEAR ® or DIAMANT ® COOL-LITE ® XTREME for double glazing unit CLIMAPLUS ® (6 | 16 | 4 mm, 90% Argon) on PLANICLEAR ® or DIAMANT ® EUROPE 86 color in reflection light transmission LT 1 [%] solar factor g-value 1 shading coefficient SC selectivity LT / g screenprinting & enamelling 6 bending 5 lamination tested towards PVB 4 tempering use as mono glazing (coating on surface #2) weight [kg/m 2 ] Ug-value [W/m 2 K] reflection outside LRe [%] reflection inside LRi [%] assessed sound reduction index Rw,P (C, Ctr) [dB] CLIMAPLUS ® DOUBLE GLAZING UNITS Values given according to the standards 1 EN 410, 2 EN 673 and 3 EN ISO 140-3/717-1 4 Solar control coating in contact with PVB modifies performances and aesthetics. Please contact us to get the approved PVB list. 5 Bending results depend on the process; trials should be done for validation. 6 Screen-printing, roller coating, spray, digital printing inks and enamels validation is required. COOL-LITE® KBT 140 blue 37 0.27 0.31 1.37 COOL-LITE® KG 137 ANNEALED golden 35 0.27 0.31 1.30 COOL-LITE® KG 137 TEMPERED golden 34 0.28 0.32 1.21 COOL-LITE® KN 166 II yes neutral 60 0.39 0.45 1.54 COOL-LITE® KNT 164 neutral 58 0.42 0.49 1.38 COOL-LITE® KNT 155 neutral 48 0.35 0.44 1.37 COOL-LITE® KNT 140 neutral 38 0.27 0.31 1.41 COOL-LITE® KS 138 II silver 37 0.25 0.29 1.48 COOL-LITE® KS 147 silver 43 0.30 0.34 1.26 COOL-LITE® ST BRIGHT SILVER DIAMANT® silver 63 0.52 0.60 1.21 COOL-LITE® ST BRIGHT SILVER PLANICLEAR® silver 61 0.51 0.58 1.20 COOL-LITE® ST 167 neutral 61 0.49 0.56 1.24 COOL-LITE® ST 150 neutral 46 0.38 0.44 1.21 COOL-LITE® ST 136 grey 34 0.28 0.32 1.21 COOL-LITE® STB 136 blue 33 0.28 0.32 1.18 COOL-LITE® ST 120 silver 19 0.17 0.20 1.12 COOL-LITE® STB 120 blue 20 0.18 0.21 1.11 PLANITHERM® XN II DIAMANT® yes extra clear 83 0.67 0.77 1.24 PLANITHERM® XN DIAMANT® extra clear 83 0.67 0.77 1.24 PLANITHERM® XN II yes neutral 82 0.65 0.75 1.26 PLANITHERM® XN neutral 82 0.65 0.75 1.26 PLANITHERM® ONE II DIAMANT® yes extra clear 73 0.54 0.62 1.35 PLANITHERM® ONE DIAMANT® extra clear 73 0.53 0.61 1.38 PLANITHERM® ONE II yes neutral 72 0.53 0.61 1.36 PLANITHERM® ONE neutral 72 0.52 0.60 1.38 23 14 1.1 25.0 35(-1;-5) temperable 30 25 1.1 25.0 35(-1;-5) 33 28 1.1 25.0 35(-1;-5) to be tempered 20 22 1.0 25.0 35(-1;-5) to be tempered 13 7 1.1 25.0 35(-1;-5) temperable yes 16 7 1.1 25.0 35(-1;-5) temperable yes 22 9 1.1 25.0 35(-1;-5) temperable yes 38 17 1.1 25.0 35(-1;-5) to be tempered 42 34 1.1 25.0 35(-1;-5) temperable 32 31 1.1 25.0 35(-1;-5) yes temperable yes yes yes 32 31 1.1 25.0 35(-1;-5) yes temperable yes yes yes 21 21 1.1 25.0 35(-1;-5) yes temperable yes yes yes 19 19 1.1 25.0 35(-1;-5) yes temperable yes yes yes 23 20 1,1 25.0 35(-1;-5) yes temperable yes yes 19 17 1,1 25.0 35(-1;-5) yes temperable yes yes 32 26 1.1 25.0 35(-1;-5) yes temperable yes yes 21 29 1.1 25.0 35(-1;-5) yes temperable yes yes 12 12 1.1 20.0 31(-1;-4) to be tempered yes 12 12 1.1 20.0 31(-1;-4) 12 12 1.1 20.0 31(-1;-4) to be tempered yes 11 12 1.1 20.0 31(-1;-4) 22 22 1.0 20.0 31(-1;-4) to be tempered yes 23 23 1.0 20.0 31(-1;-4) 22 23 1.0 20.0 31(-1;-4) to be tempered yes 22 23 1.0 20.0 31(-1;-4) coating processing possibilities with EASYPRO on demand to be tempered / annelead COOL-LITE ® ST (with PLANITHERM ® XN on face #3) for double glazing unit CLIMAPLUS ® (6 | 16 | 4 mm, 90% Argon) on PLANICLEAR ® Low-E coating for double glazing unit CLIMAPLUS ® (4 | 16 | 4 mm, 90% Argon) on PLANICLEAR ® or DIAMANT ® COOL-LITE ® K (with PLANITHERM ® XN on face #3) for double glazing unit CLIMAPLUS ® (6 | 16 | 4 mm, 90% Argon) on PLANICLEAR ® color in reflection light transmission LT 1 [%] solar factor g-value 1 shading coefficient SC selectivity LT / g screenprinting & enamelling 6 bending 5 lamination tested towards PVB 4 tempering use as mono glazing (coating on surface #2) weight [kg/m 2 ] Ug-value [W/m 2 K] reflection outside LRe [%] reflection inside LRi [%] assessed sound reduction index Rw,P (C, Ctr) [dB]