www.youtube.com/NortonAbrasivesEMEA 28 / METAL WORKING METAL WORKING DESCRIPTION ART NO. EXHAUST DIRECTION THROTTLE TYPE AIR CONSUMPTION COLLET CHUCK WEIGHT OF TOOL 50mm (2”) 22.000 MAX RPM (0,45 HP) mini angle grinder 66261177765 Rear Level 85 l/min 6mm 0,742 kg MINI ANGLE GRINDER • Model: Norton Mini Angle grinder 50mm (2”) • 22.000 MAX RPM (0,45 HP) • Designed for use with the quick-change back-up pad, SpeedLok and mini flap discs • Use with 38mm and 50mm quick change sanding discs and spindle mounted sanding specialties only. The accessories must have a rated speed greater than the speed marked on the tool Norton mini angle grinder APPLICATION TIPS: • Air tools require regular lubrication throughout the life of the tool. The air motor and bearing use compressed air to power the tool. As moisture in compressed air will rust the air motor, it must be lubricated daily. An inline oiling device is recommended. • This in an UNGUARDED tool and should NEVER be used with cut-off discs or other bonded abrasive grinding wheels. Never use any product that has a MAX RPM rating less that the RPM marked on the tool. METAL WORKING
RkJQdWJsaXNoZXIy MTM0NjUyNQ==