105 / 306
COATED
ABRASIVES
105
GRINDING OPERATION
The flap disc should only be brought into contact with the work, when the machine is running at its operational
speed. Apply the flap disc to the work at the shallowest angle possible. About 10 degrees is recommended. Grind
‘off’ an edge rather than ‘into’ it when grinding rough welds or metal edges. Do not attempt to use a flap disc for
slot grinding, cutting-off or wet grinding. After use the angle grinder should be stored with care and the face of the
flap disc must not be in contact with bench or floor.
PERSONAL PROTECTION
Safety goggles, ear defenders, safety gloves, dust masks and, if grinding conditions are severe, additional face
protection. Leather aprons and safety shoes must be worn.
PERSONAL PROTECTION
Mouth
Protection
Wear
Gloves
Eye
Protection
Ear
Protection
Read
Instruction
Dry
Wet